Pressure Measurement - Fluke 525B Getting Started Manual

Pressure Measurement

The Calibrator can accept either the Fluke 700 or 525A-P series pressure modules. Pressure modules plug directly into
the front panel Lemo connector with the Calibrator firmware autodetecting the type and value of the module you are
attaching.
Range ....................................... Determined by pressure module
Accuracy/Resolution .............. Determined by pressure module
Units
PSI ........................................ pounds per square inch
inH O4°C .............................. inches of water at 4 degrees Celsius
2
inH O20°C ............................ inches of water at 20 degrees Celsius
2
cmH O4°C ............................ centimeters of water at 4 degrees Celsius
2
cmH O20°C .......................... centimeters of water at 20 degrees Celsius
2
BAR....................................... bars
mBAR.................................... millibars
KPAL ..................................... kilopascals
inHg 0°C ............................... inches of mercury at 0 degrees Celsius
mmHG 0°C ........................... millimeters of mercury at 0 degrees Celsius
2
Kg/cm .................................. kilograms per square centimeter
Temperature/Pressure Calibrator
Pressure Measurement
15