Fluke 125
Users Manual
Freezing the Screen
You can freeze the screen (all readings and waveforms) at
any time.
Freeze the screen. HOLD
appears at the bottom of the
reading area.
Resume your measurement.
2-8
Holding a Stable Reading
®
The Touch Hold
mode captures a stable main (large)
reading on the display. When a new stable reading is
detected, the test tool beeps and displays the new
reading.
Use the following procedure for the Touch Hold function:
Open the INPUT A menu.
Enter the Touch Hold mode,
THOLD appears at the bottom of
the reading area.
Wait until an audible beep: now
)
)
BEEP
)
you have a stable reading.
Turn Touch Hold off and return to
normal measurement.