Safely Using The Test Tool - Fluke 125 User Manual

Fluke 125
Users Manual

Safely Using the Test Tool

Attention
Carefully read the following safety
information before using the test tool.
Safety Precautions
Specific warning and caution statements, where they
apply, will be found throughout the manual.
A Caution identifies conditions and actions that may
damage the test tool.
A Warning identifies conditions and actions that pose
hazard(s) to the user.
Symbols used on the test tool and in this manual are
explained in the next table.
To avoid electrical shock, use only Fluke power
supply, Model PM8907 (Power Adapter/Battery
Charger).
0-4
Warning
See explanation in
manual
Disposal information
Recycling information
Double Insulation
(Protection Class)
Do no dispose of this product as unsorted municipal
waste. Go to Fluke's website for recycling information.
Warning
Should this test tool be used with AC coupling
selected, or manual operation of amplitude or time
base ranges, the measuring results displayed on
the screen may not be representative of the total
signal. This can result in the presence of
dangerous voltages of more than 42V peak (30V
rms), not being detected. To guarantee user safety,
all signals should first be measured with DC
coupling selected and in fully automatic mode.
This ensures that the full signal content is
measured.
Equal potential inputs
Earth
Conformité
Européenne
Conforms to
applicable Canadian
and US standards