Min/Max/Ave Values; Store And Recall Historical Data (972B Only); Save Measurement Data - Fluke 972A User Manual

972A/972B
Users Manual

Min/Max/Ave Values

Each time you push
temperature symbol
•
The maximum temperature,
•
The minimum temperature,
•
The average temperature,
To return to the normal display, push and hold

Store and Recall Historical Data (972B only)

The Meter can save up to 99 sets of measurement data and can recall any data at any time.

Save Measurement Data

During measurement, to save the current measured value:
1. Push and hold
2. Release
10
Figure 5. Wet bulb and dew point temperature
during measurement, the Meter's screen will show the MIN/MAX
and cycle through these screens:
shows on the screen, as shown on the left in
shows on the screen, as shown in the middle in
shows on the screen, as shown on the right in Figure 6.
Figure 6. MIN/MAX/AVE Temperature
for at least 2 seconds.
when the number of the storage location increases by 1, as shown in
for 2 seconds.
Figure 6.
Figure 6.
Figure 7.