Positioning the Waveform on the Screen
Considerable flexibility is offered in moving the
waveform(s) around the screen.
Press until you have left any open
menu. Observe that the following
main menu appears on bottom of
the screen.
Choose A MOVE
Position the waveform of INPUT
A on the screen.
Waveform positioning is demonstrated in Figure 2-10.
Observe that the trigger identifier ( ) moves horizontally
on the screen.
For 3 phase power measurements the waveform
positions are fixed.
Note:
Changing the Graphic Representation on the Screen
Figure 2-10. Positioning the Waveform
2
Scope/Meter Mode
2-11