Scope/Meter Mode; Introduction; Selecting The Scope/Meter Mode - Fluke 125 User Manual

Introduction

The Scope/Meter mode offers you
• a dual-input 40 MHz digital oscilloscope
• two 5,000 counts true-RMS digital multimeters
This Chapter provides a step-by-step introduction to the
Scope and Meter measurements. The introduction does
not cover all of the capabilities of the test tool but gives
basic examples to show how to use the menus perform
basic operations.

Scope/Meter Mode

Selecting the Scope/Meter Mode

To select the Scope/Meter mode do the following:
Open the application mode menu.
Highlight SCOPE/METER
Enter the SCOPE/METER mode.
Chapter 2
2-1