Removing The Lamp Unit(S) - Barco iD LR-6 R9010342 User Manual

How to reset the lamp runtime in the SIM5Plus?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset
7. Press ENTER
A dialog box is displayed
Image 9-10
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
W
ARNING
technician.
9.3.2

Removing the lamp unit(s)

What has to be done ?
1. The lamp power connection has to be disconnected.
2. The lamp unit has to be removed.
Perform the procedure for both lamps if necessary.
In this procedure lamp1 is replaced, the procedure being the same for lamp2.
How to remove the lamp unit ?
1. Disconnect the lamp
R59770134 ID LR-6 27/05/2011
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
9. Maintenance
121