Connections; Power Connection; Input Source Connections - Barco iD LR-6 R9010342 User Manual

3. Installation
C
AUTION
Floor
Image 3-9
3.5

Connections

3.5.1

Power connection

AC power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet.
Plug the female power connector into the male connector at the front of the projector.
The power input is auto-ranging from 90 to 240 VAC.
Fuses
For continued protection against fire hazard :
• refer replacement to qualified service personnel
• ask to replace with the same type of fuse.
3.5.2

Input Source connections

Overview
• Input section
• Input facilities
• 5-Cable input
• Composite Video Input
• S-Video input
• Digital Visual Interface (DVI) input
• Computer input
• Serial Digital Interface (Optional)
• Audio input/Output (Optional)
• Communications Connections
16
:
Never place the projector on either side !
Floor
R59770134 ID LR-6 27/05/2011