Table of Contents
Advertisement
This can also be done by using the dedicated PiP Adjust key on the RCU
Image 6-72
PiP adjust in case of 2by2 layout
A
Data1 window has the focus, new settings will only affect Data1 window
B
Video1 window has the focus, new settings will only affect Video1 window
PiP adjust
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP Adjust
5. Press ENTER
The menu dissapears.
The focus moves to the next window when pressing ENTER (clockwise rotation)
If you press BACK or if you wait 5 seconds the menu is displayed.
When using the PiP adjust key on the RCU the corresponding source box is displayed in the bottom right
corner.
How to adjust a window in the layout ?
1. Use the PiP Adjust key or function in the menu to choose the window to be adjusted
2. Press ENTER
A wizard bar is displayed in the bottom of the screen
Follow the procedure.
6.5.7
Color keying
Principle of color keying
Take e.g. two image. One taken on a full color background and the other a normal image. The full color background will be replaced
by the second image via the principle of color keying.
R59770134 ID LR-6 27/05/2011
6. Advanced
81
Advertisement
Chapters
Table of Contents
