Background - Barco iD LR-6 R9010342 User Manual

Image 6-76
7. Press ENTER
A white bullet shows the active effect.
The next source switching will be done using the selected effect
The Random mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
The switching effects are only possible in the full screen mode
When the source switching mode is the fade in/out mode, the audio (when available) switching will also be
done using a fade in/out effect.
6.6.2

Background

Purpose
If there is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.
How to change the background ?
1. Press MENU to activate the Toolbar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Background
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired background
Image 6-77
R59770134 ID LR-6 27/05/2011
6. Advanced
83