Table of Contents
Advertisement
9. MAINTENANCE
9.1
Cleaning the lens
To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for cleaning. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee
cloth (delivered together with the lens kit). Order number : R379058.
TM
How to clean the lens ?
1. Always wipe lenses with a CLEAN Toraysee
2. Wipe lenses in a one single direction.
Warning:
Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave the cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
C
AUTION
cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
Other lenses can also be cleaned safely with this Toraysee
9.2
Cleaning the dustfilters
Overview
•
Dustfilters
•
Cleaning
9.2.1
Dustfilters
Location of the filters
There are 4 filters located at different positions
1.
Filter1: Lamp 1
2.
Filter2 : Lamp 2
3.
Filter 3 : X-Cube filter
4.
Filter 4 : Input filter
R59770134 ID LR-6 27/05/2011
TM
cloth.
:
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
TM
cloth.
9. Maintenance
117
Advertisement
Chapters
Table of Contents
