Side Filter Cover; Removing The Side Filter Cover; Installing The Side Filter Cover; Lamp Cover - Barco SIM 7C R9011206 Service Manual

4.4 Side filter cover
Overview
• Removing the side filter cover
• Installing the side filter cover
Description
The side filter cover is used to fix the side dust filter in its housing.
4.4.1 Removing the side filter cover
Necessary tools
Torx screwdriver T10
How to remove the side filter cover?
1. See the procedure: Removing the side filter
4.4.2 Installing the side filter cover
Necessary tools
Torx screwdriver T10
How to install the side filter cover?
1. See the procedure: Mounting the side filter
4.5

Lamp cover

Overview
•

Removing the lamp cover

• Installing the lamp cover
Description
The lamp cover is used to protect the lamp and to prevent the light from escaping the projector housing.
4.5.1 Removing the lamp cover
Necessary tools
Torx screwdriver T10
How to remove the lamp cover?
1. Remove the 3 fixing screws
Tip: The screws are no-loss screws and will not drop.
Image 4-11
Lamp cover: fixing screws
2. Slide lamp cover to the rear side of the projector and then down to release it
R59770119 SIM 7C 28/05/2008
4. Covers
17