Client System Requirements - Altigen AltiView Manual

• Setting Activity made easier - from the AltiView main window, use
the Activity drop down list to select the activity for the extension.
• Inputted number kept when switching between Voice Mail and
Calls tab
• Reconnect button when connection is dropped - In 5.0, when a
connection between AltiServ and AltiView is broken, AltiView pops
a message box informing the user about the broken connection; the
user can only click on OK to end the application. In 5.0A, when the
connection is broken, AltiView will pop a message box to inform the
user and will also provide a Reconnect button. The Reconnect button
will connect to AltiServ again without having to log back onto
AltiView to re-enter the extension number and password.
• Changed Auto Answer minimum duration to 0 seconds - The Auto
Answer minimum duration is reduced from 3 to 0 seconds. If the
duration is set to 0, all incoming calls will go connect state right away.
Both caller and callee will not hear ring tone.

Client System Requirements

The client system must each meet the following minimum requirements.
For server system requirements, see the AltiWare OE/ACC System
Installation and Administration Manual or the AltiContact Manager
Administration Manual.
• IBM/PC AT compatible system
• Intel 300 MHz (or faster) Pentium
• Windows 98 (or higher), or Windows 2000, or Windows NT 4.0 or
higher, Server or Workstation.
• 30 MB Hard Drive Disk Space
• 128 MB DRAM
• SVGA monitor (800 x 600) with 256 color display, or better
• Keyboard and Mouse
• AltiWare OE/ACC Release 5.0A or AltiContact Manager 5.0A
running on a server accessible to this client.
2 AltiView Manual