Client System Requirements; Session Licensing And License Upgrade Procedures; Altisupervisor Session License; C Hapter - Altigen AltiSupervisor Manual

For altiware open edition (oe) / altiserv contact center (acc) release 5.0 and alticontact manager (acm) release 5.0
Hide thumbs Also See for AltiSupervisor:
Table of Contents

Advertisement

Important: 4.6 client programs cannot be installed in the same PC running
5.0 client programs.

Client System Requirements

The client system must each meet the following minimum requirements.
For server system requirements, see the AltiWare OE/ACC System
Installation and Administration Manual or the AltiContact Manager
Administration Manual.
IBM/PC AT compatible system
Intel 300 MHz (or faster) Pentium
Windows 98 (or higher), or Windows 2000, or Windows NT 4.0 or
higher, Server or Workstation.
30 MB Hard Drive Disk Space
128 MB DRAM
SVGA monitor (800 x 600) with 256 color display, or better
Keyboard and Mouse
AltiWare OE/AltiContact Manager 5.0 running on a server accessible
to this client.
Session Licensing and License Upgrade
Procedures

AltiSupervisor Session License

The AltiSupervisor Session license enables a per concurrent session of
AltiSupervisor. It includes a Desktop Connect/SDK client license. Up to 20
concurrent AltiSupervisor sessions are supported.
Upgrading Licenses
To increase the number of simultaneous AltiSupervisor sessions, refer to
the license activation and registration procedures in Chapter 2 - Software
Installation of the AltiWare OE System Installation and Administration
Manual or AltiContact Manager Administration Manual.
2 AltiSupervisor Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Altisupervisor 5.0

Table of Contents