Auxport Setup - Neoware c50 - Thin Client User Manual

Teemtalk 5.0 for windows ce & xpe

Hide thumbs Also See for Neoware c50 - Thin Client:

Table of Contents

Auxport Setup

This dialog box is displayed by selecting Auxport in the Settings menu. It enables

you to specify a COM or LPT port for bidirectional output when in any DEC VT

mode, ANSI BBS, Sco Console, HP 700/92 or IBM 3151 mode.

The Functionality options enable you to set the auxiliary port as bidirectional and

specify that it is to be opened at start-up.

Clicking the Configure button will display a dialog box in which you can specify

settings for the COM port. The options in it are described in the Serial Settings section

earlier in this chapter.