Configuring The Remote Session Settings - Acer AT350 F2 Series Service Manual

Configuring the Remote Session Settings

This feature allows the user to enable or disable encryption support on
IKVM, or to select the Virtual Media Attach mode for console redirection.
When you click the Remote Session in the menu bar, the following screen
displays.
1 This item displays the current Virtual Media Attached mode. To change
the Virtual Media Attached mode, select the desired setting from the
list below.
• Auto Attach (Default): Select this mode to automatically enable
virtual media support and make it available for remote access.
Virtual devices will only be shown in the operating systems and
the BIOS when a device or an ISO image is connected through
the virtual media wizard.
• Attach: Select this mode to activate a virtual media and make it
available for remote access. A virtual device will always be seen
in the system BIOS even when it is not active.
• Detach: Select this mode to disable virtual media for remote
access.
2 After making selection, click <Save> to save the settings.
163