Acer AT350 F2 Series Service Manual page 124

4u dual socket rack-mountable tower server
Hide thumbs Also See for AT350 F2 Series:
Table of Contents

Advertisement

110
Optical drive activity indicator does not light.
Do the following:
Make sure the SATA and power cables are properly connected.
Check that relevant switches and jumpers on the drive are set
correctly.
Check that the drive is properly configured.
Optical drive tray cannot be ejected.
Insert the tip of a paperclip into the small hole on the optical drive. Slowly
pull the tray out from the drive until the tray is fully extended.
Optical drive cannot read a disc.
Do the following:
Make sure you are using the correct type of disc.
Make sure the disc is properly seated in the drive.
Make sure the disc is unscratched.
Make sure the drive's cables are properly connected.
Newly installed memory modules are not detected.
Do the following:
Make sure the memory modules specifications comply with the system
requirements.
Make sure the memory modules have been populated according to the
system guidelines.
Make sure the memory modules are properly installed on their
mainboard slots.
Network connection indicators do not light.
Do the following:
Check the cabling and network equipment to make sure that they are
in proper condition.
Reinstall the network drivers.
Try another port or hub on the switch.
5 System troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents