4
Check this box to enable Virtual LAN support, and enter the VLAN ID
in the field.
5
LAN Interface - This feature allows the user to select the port to be
used for IPMI out-of-band communication.
•
The default setting is Dedicate, which will allow Smart Console to
connect through the BMC Management port at all time
•
Select <Failover> for Smart Console to be connected from either
the shared LAN port (LAN1) or BMC Management port.
•
Select <Shared> for Smart Console to connect through the LAN
port on the board.
6
RMCP Port - This feature allows the user to select the desired RMCP
(Remote Mail Checking Protocol) port based on his configuration. The
default port is 623.
7
After entering all fields above, click <Save> to save the Network
settings.
161