Configuring The System Os - Acer AT350 F2 Series Service Manual

Configuring the system OS

Acer Smart Setup assists you to conveniently install your choice of
operating.
To start using Acer Smart Setup, follow the steps below.
1 Locate the Smart Setup DVD included in the system package.
2 If an optional DVD drive is not installed in the server, connect an
external DVD drive to your system. Press the Stop/Eject button on the
DVD drive to eject the disc tray.
3 When the disc tray slides open, insert the Smart Setup DVD with the
label side of the disc facing upward.
Note: When handling the disc, hold it by the edges to avoid smudges
or fingerprints.
4 Gently press the disc down to make sure that it is properly inserted.
Caution! While pressing the disc, be careful not to bend the disc tray.
Make sure that the disc is properly inserted before closing the disc
tray. Improper insertion may damage both the disc and the CD-ROM
drive.
5 Press the drive Stop/Eject button again to close the disc tray.
6 On the Acer Smart Setup window, select OS Installation.
7 Follow all onscreen instructions.
For more information, refer to the Smart Setup Help file.
Note: Acer Smart Setup only supports the Microsoft Windows Server,
Red Hat Enterprise Linux, and SUSE Linux Enterprise Server
operating systems. The Windows or Linux installation disc(s) is
required when you install the OS with Smart Setup.
23