Acer AT350 F2 Series Service Manual page 102

88
Parameter
Bits Per second
Data Bits
Parity
Stop Bits
Flow Control
VT-UTF8 Combo
Key Support
Recorder Mode
Description
Use this feature to set the transmission
speed for a serial port used in Console
Redirection. Make sure that the same
speed is used in the host computer and
the client computer. A lower transmission
speed may be required for long and busy
lines.
Use this feature
transmission size for Console Redirection.
A parity bit can be sent along with regular
data bits to detect data transmission
errors. Select Even if the parity bit is set to
0, and the number of 1's in data bits is
even. Select Odd if the parity bit is set to 0,
and the number of 1's in data bits is odd.
Select None if you do not want to send a
parity bit with
transmission. Select Mark to add a mark
as a parity bit to be sent along with the
data bits. Select Space to add a Space as
a parity bit to be sent with your data bits.
A stop bit indicates the end of a serial data
packet. Select 1 Stop Bit for standard
serial data communication. Select 2 Stop
Bits if slower devices are used.
This feature allows the user to set the flow
control for Console Redirection to prevent
data loss caused by buffer overflow. Send
a "Stop" signal to stop sending data when
the receiving buffer is full. Send a "Start"
signal to start sending data when the
receiving buffer is empty.
Select Enabled to
Combination Key support for ANSI/VT100
terminals.
Select Enabled to capture the data
displayed on a terminal and send it as text
messages to a remote server.
to set the data
your data bits
enable VT-UTF8
4 System BIOS
Options
9600
19200
57600
115200
(bits/second)
7 Bits
8 bits
None
Even
Odd
Mark
Space
in
1
2
None
Hardware
RTS/CTS
Software
Xon/
Xoff.
Enabled
Disabled
Enabled
Disabled