Acer AT350 F2 Series Service Manual page 108

94
Parameter Description
BMC IP This features allows the user to select how an IP
Address address is assigned to a client computer or
Source network device. Select DHCP (Dynamic Host
Configuration Protocol) to allow a client (computer
or device) to obtain an IP address from a DHCP
server that manages a pool of IP addresses and
network information on a "request and grant"
basis. Upon timeout (or lease expiration), the IP
address assigned to the client can be reassigned
to a new client. Select Static (Static Allocation) to
allow the host server to allocate an IP address
based on a table containing MAC Address/IP
Address pairs that are manually entered (such as
by a network administrator). Only clients with a
MAC address listed in the MAC/IP Address Table
will be assigned an IP address. The IP Address
allocated to the client is on a longer term basis
than that assigned by the DHCP mentioned in the
other option.
IP Address The BIOS will automatically enter the IP
address of this machine; however, it may be
overridden. This should be in decimal and in
dotted quad form. The value of each three-digit
number separated by dots should not exceed
255.
Subnet Mask This item displays the current subnet mask
setting for your IPMI connection. This should
be in decimal and in dotted quad form. The
value of each three-digit number separated by
dots should not exceed 255.
Mac Address The BIOS will automatically enter the Mac
address of this machine; however it may be
over-ridden. Mac addresses are 6 two-digit
hexadecimal numbers (Base 16, 0 ~ 9, A, B, C,
D, E, F) separated by dots.
Default The BIOS will automatically enter the Gateway
Gateway address of this machine; however it may be
over-ridden. This should be in decimal and in
dotted quad form. The value of each three-digit
number separated by dots should not exceed
255.
4 System BIOS
Options
DHCP
Static