Pci Configuration - Acer AT350 F2 Series Service Manual

82

PCI Configuration

This feature allows the user to configure the PCIe/PCI/PnP settings.
Parameter
PERR#
Generation
SERR#
Generation
CPU1 Slot 1 PCI-
E 3.0 x16
OPROM/CPU1
Slot 2 PCI-E 3.0
x4 OPROM/
CPU1 Slot 3 PCI-
E 3.0 x16
OPROM/CPU2
Slot 1 PCI-E 3.0
x16 OPROM/
CPU2 Slot 2 PCI-
E 3.0 x16
OPROM/CPU1
Slot 1 PCI-E 3.0
x8 OPROM
On Board
Graphics
Controller
VGA Priority
Onboard LAN
Option ROM
Select
Description
Select Enabled to allow a PCI device to
generate a PERR number for a PCI Bus
Signal Error Event.
Select Enabled to allow a PCI device to
generate an SERR number for a PCI Bus
Signal Error Event.
Select Enabled to enable Option ROM
support to boot the computer using a
network interface from the slots specified
above.
Select Enabled to enable onboard
graphics controller.
This feature allows the user to select the
graphics adapter to be used as the
primary boot device.
Select Enabled to enable onboard LAN
device.
4 System BIOS
Options
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Onboard
Add-on
Enabled
Disabled