Removing A Memory Module - Acer AT350 F2 Series Service Manual

64

Removing a memory module

Important: Before removing any DIMM from the mainboard, make
sure to create a backup file of all important data.
1 Perform steps 1 through 3 of the previous section.
2 Press the holding clips on both sides of the slot outward to release the
DIMM (1).
3 Gently pull the DIMM upward to remove it from the slot (2).
4 If you intend to install a new DIMM, refer to the previous section,
otherwise observe the post-installation instructions described on page
27.
3 System upgrades