Setup Menu List - Panasonic WJ-ND400K Setup Instructions

Setup menu list

You must pre-configure settings from the setup menu when using the recorder. To display the setup menu, click the [Setup] button.
Setting item
Quick
Setup
Basic
Basic
Time & date
Emergency rec.
Emergency rec.
Event
Basic
Terminal input
Site alarm
Command alarm
Schedule
Time table
Program
Special days
Camera
NW camera
Group
Sequence
Server
NTP
FTP
Mail
Proxy
Network
Basic
DDNS
SNMP
Panasonic alarm
protocol
Description
Display a menu with the minimum settings necessary to use the recorder.
Set the basic operations for the recorder.
Set the time and date.
Set the emergency recording duration, rate, audio, etc.
Set the basic setting for alarm action.
Set the alarm action when an event occurs.
Set the alarm action when a Site alarm occurs.
Set the alarm action when a Command alarm occurs.
Configure time table settings to schedule operations for each day of the
week, and assign each time table to a program.
Create a recording operation program. You can create up to 8 programs.
Set recording operations in each program, including the recording rate and
audio recording, for each camera channel.
Assign separate time tables for each day of the week for special days.
Configure camera network settings, including the camera address and port
number.
Set the group title of a camera.
Set camera sequence operations.
Configure settings, such as the NTP server address, for time adjustment
based on the NTP server.
Set the FTP server. Configure to periodically send images from a camera
connected to the recorder to a specified FTP server.
Set to send e-mails to registered addresses when an event or an error
occurs.
Set the proxy server.
Set On or Off for the proxy server and set the server address.
Configure the basic settings for the network. Configure network configuration
settings like the IP address, default gateway and DNS server.
Set the DDNS server.
Set On or Off for the DDNS server and set user names.
Set the SNMP server.
Configure these settings when connecting to an SNMP manager and check
the status of the recorder.
Set to send a message to registered addresses when an event or an error
occurs using our original communication method.
Getting started
Page
page 26
page 31
page 32
page 34
page 38
page 39
page 40
page 41
page 46
page 42
page 47
page 48
page 52
page 53
page 55
page 56
page 58
page 60
page 61
page 65
page 66
page 67
9