Panasonic WJ-ND400K Setup Instructions page 89

6
Select the HDD you want to format as the HDD to set with
a pre-event recording area, and then click the [Set]
button.
This will display a window for allocating pre-event recording
area.
7
Select the camera channel and enter the amount of
space to be allocated.
• Pre-event recording areas can be created for up to 64
channels on a single HDD.
• A camera channel that is already specified for a pre-event
recording area on another HDD cannot be selected. (If an
HDD formatted for pre-event recording area from another
ND400 is recognized, channels pre-set on the HDD
cannot be selected.)
• Set at least 5 GB of space for the pre-event recording
area of each camera channel. Enter 0 to not set the
capacity.
8
Click the [Format] button.
Formatting disks
89