Ddns - Panasonic WJ-ND400K Setup Instructions

DDNS

Use the following procedure to configure settings for using a DDNS (Dynamic Domain Name System).
1
Click the [Network] button on the setup menu.
2
On the sub-menu that appears, click [DDNS].
This will display the [DDNS] setup window.
DDNS settings
Item
DDNS
User name
Password
Access interval
Host name
♦Initial default
*1 You can enter the following single-byte alpha-numeric characters and symbols.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 ! # $ % ` ( ) * + , - . / : ; < = > ? @ [\] ^ _ { | } ~
Settings
Off♦ / On
Name input (Blank♦)
Password input (Blank♦)
10min / 30min / 1h♦ / 6h / 24h
Name input (ND400♦)
3
Configure the settings for each item.
Refer to "DDNS settings" table for details about setting items.
4
Click the [Set] button.
Description
Specifies whether a DDNS is used.
Enter the user name to be registered on the DDNS.
• Enter up to 32 single-byte alphanumeric characters and
*1
symbols.
Enter the password for the above user name.
• Enter up to 32 single-byte alphanumeric characters and
*1
symbols.
Specifies the DNS update interval.
Enter the host name to be registered on the DDNS.
• Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).
Network
65