Schedules; Program - Panasonic WJ-ND400K Setup Instructions

Network disk recorder
Hide thumbs Also See for WJ-ND400K:
Table of Contents

Advertisement

Schedules

Create a schedule by specifying the day and time to record.

Program

Use the procedure in this section to create a recording program that controls live images, the recording rate, etc.
You can create up to eight recording programs on the recorder.
1
Click the [Schedule] button on the setup menu.
2
On the sub-menu that appears, click [Program].
This will display the schedule program setting window.
42
3
Click the [Setup >>] button of the program number
whose settings you want to configure.
This will display the program setting window.
Button Functions
[Copy] button
: Copies the settings of the currently
selected
settings of the currently displayed
window.
[Measurement]
: Click to check for proper operation at
button
the specified recording rate. (page 45)
4
Configure the settings for each item.
Refer to "Program settings" table for details about the
settings.
To configure the settings of a camera that is not shown on
the display, click the applicable camera number range
above the [Set] button to change the contents of the
display.
Clicking a camera number range will save the currently
displayed camera settings.
5
Click the [Set] button.
Important:
Only the currently displayed page (the selected program) can
be copied.
program.
Changes
the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nd400k/g

Table of Contents