Panasonic WJ-ND400K Setup Instructions page 43

Program settings
Item
Model
Compression
Measurement
Max. network speed (Mbps)
Max. bit rate (ips)
Recorder setup - Live video
Rate
Audio
Recorder setup
Manual rec.
Schedule rec.
Recorder setup - Event rec. - Pre-event
Rate
Duration
Recorder setup - Event rec. - Post-event
Rate
Settings
*1 *2
Off / 1ips / 2ips / 3ips / 5ips /
*3
10ips / 15ips / All / I-Frame
*1*2*3
Off / On
*1
Off / 0.1ips / 0.2ips / 0.3ips /
*2
0.5ips / 1ips / 2ips / 3ips / 5ips /
*3
10ips / 15ips / All / I-Frame
*1*2*3
Off / 0.1ips / 0.2ips / 0.3ips /
0.5ips / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All / I-Frame
*1*2*3
Off / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All /
I-Frame
*1*2*3
2s / 5s / 10s / 20s / 30s / 1min /
3min / 5min / 10min / 15min
*1*2*3
Off / 1ips / 2ips / 3ips / 5ips /
10ips / 15ips / All /
I-Frame
Description
Shows the model number of the selected camera.
Shows the compression format of the recorded image.
• To change the compression format, refer to "NW camera
(page 48)".
Shows the maximum bit rate on the network being used when
the [Measurement] button is clicked.
Shows the maximum recording rate on the network being used
when the [Measurement] button is clicked.
• A red rate setting value indicates that live images or
recording of the image may not be possible at the specified
rate.
Specifies the live image rate of the camera image.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.
Specifies whether audio should be transmitted with live images.
• Audio and live video are sent at the same time. Audio cannot
be transmitted unless live images are transmitted.
• Audio transmitting can be selected only for a camera model
that supports audio transmitting.
Specifies the recording rate for manual recording.
Available settings differ according to the currently selected
compression format.
Specifies the recording rate for schedule recording.
Available settings differ according to the currently selected
compression format.
Specifies the rate of pre-event recording.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.
• [All] cannot be selected when [M-JPEG] is selected as the
compression format.
Specifies the time of pre-event recording.
• Pre-event recording on a camera channel for which a pre-
recording area has been made on the HDD is performed at
all times by the pre-recording area in the HDD. Refer to
"Pre-event recording area formatting (page 88)" for details
about pre-recording area.
• For guidelines on times in pre-event recording when the pre-
recording area has not been made on the HDD, refer to the
memo at page 44.
Specifies the rate of post-event recording.
• Available settings differ according to the currently selected
compression format. Refer to "Checking and changing a
camera (Manually setting) (page 50)" for details about
compression method settings.
Schedules
43