Administrator - Panasonic WJ-ND400K Setup Instructions

Administrator

Use the following procedure to configure settings to assign recorder administrator privileges to a user (administrator).
The administrator name and password can be changed, and the operation level and other operation privileges can be configured.
1
Click the [User mng.] button on the setup menu.
2
On the sub-menu that appears, click [Administrator].
This will display the "Administrator Settings" window.
Important:
• Administrator settings can be configured only by a user who is logged in as an administrator.
• If you do not change the administrator password, a prompt to change the password will appear on the display after log in.
Administrator settings
Item
Administrator name
New password
Retype new password
Level
Access priority
Default screen
Camera partitioning
♦Initial default
Settings
Name input
(ADMIN♦)
Enter password
(Blank♦)
LV1♦
0♦
[Cam.1]♦ to [Cam.64] / [Cam.1-4]
/ [Cam.5-8] / to / [Cam.61-64] /
[Seq]
[View/Operate]♦
3
Configure the settings for each item.
Refer to "Administrator settings" table for details about the
settings.
4
Click the [Set] button.
Description
Change the administrator name here.
• Enter between 5 and 14 single-byte alphanumeric
characters.
Enters the password.
• Enter between 5 and 8 single-byte alphanumeric characters.
• Use a password that is not easily guessable by another
person. Also, take care that you do not forget the password.
• To ensure security, change passwords periodically.
Shows the user level. The level of the administrator is [LV1],
which cannot be changed.
• For operations that can be performed at each level, refer to
"User level (page 74)".
Shows the priority sequence for operations when multiple users
are logged in on the recorder at the same time. The access
priority of the administrator is [0] (highest), which cannot be
changed.
Specifies the live image displayed immediately after log in.
• [Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.
• Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.
• Selecting [Seq] displays images in a specified sequence.
Shows the scope of control for each camera channel. The
scope of the administrator is [View/Operate], which cannot be
changed.
User management
69