The Remote Control; Quick Setup - Panasonic DVD-XP50 Operating Instructions Manual

The remote control
Batteries
• Insert so the poles (+ and —) match those in the remote control.
• Do not use rechargeable type batteries.
Do not:
• mix old and new batteries.
• use different types at the same time.
•heat or expose to flame.
•take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
■ Use
Aim at the sensor (~ page 8, Control reference guide), avoiding obstacles,
at a maximum range of 7 m (23 feet) directly in front of the unit.
Quick Setup
D—
—. icp smie/^ligES
rO
o o ©
-0*0
Q ©
i
©
©
sit» PJUJ3E nxr
o' 5 o
-ED ©CD
DISPLAY- —
"Q
f~\
o
—
[BUT
| * | **»
surra axueu*
-
o _
- RETURN
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings. You can
access this screen again later if you need to (• page 21, Others—QUICK
SETUP).
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
Press [(!)] to turn on the unit.
Press [SETUP] to
show the QUICK
SETUP screen.
Press [A, ▼] to select
the menu language
and press [ENTER].
Press [A, ▼] to select
press [ENTER].
|Q Press [A, ▼] to select the item and press
[ENTER].
•Audio Language {• page 21)
•Subtitle Language (-» page 21)
•TV Aspect (— right)
• Progressive Out (•* page 21)
•EEl
Speaker Setting (-» page 21)
H Press [ENTER] and then [SETUP] to end the
settings.
■ TV Aspect
Select "4:3" (regular) or "16:9" (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on
some discs is shown (~ page 21, Video—TV Aspect).
•4:3 Letterbox
Widescreen software is shown in the letterbox style on a
4:3 aspect television.
■ Viewing 4:3 aspect pictures on a 16:9
widescreen television using progressive output
16:9 aspect pictures are shown correctly, but 4:3 aspect pictures are
stretched horizontally to fill the screen.
•It your television can change the aspect when input is progressive
Use the television to change the aspect to the correct one.
• If your television cannot change the aspect when input is
progressive
Switch Video output mode to "4801" (• below) so the "PROG.OUT'
indicator on the unit's display goes out. Output will now be interlace and
4:3 aspect picture is shown in the middle of the screen.
•4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the screen
of a 4:3 aspect television (unless prohibited by the
producer ol the disc).
Enjoying
Preparation
•Connect through the COMPONENT VIDEO OUT terminals (— page 6).
•In QUICK SETUP (or SETUP menus • page 21), set "Progressive Ouf
to "Enable".
1. Press (DISPLAY) to display Unit information.
2
.
While the leftmost icon is
highlighted, press [A, ▼]
to select Picture Menu.
Press [■< ►] to select Video output mode.
Press [A, ▼] to select "480P" so the
"PROG.OUT indicator on the unit's display
lights.
m
CD
Video output mode
ti r
c r
II
1 J
L
PHE1
•Although the "PROG.OUT indicator lights on the unit's display, output
will still only be interlace if you have connected the unit to your television
through the VIDEO OUT or S VIDEO OUT terminals.
•When progressive output is on, closed captions will not be displayed.
To return to the previous screen
Press [RETURN].
9