Maintenance; Recorder Information - Panasonic WJ-ND400K Setup Instructions

Maintenance

Check the recorder and network status, and configure HDDs.

Recorder information

Use the following procedure to view software and hardware versions, MAC address, serial number, internal temperature, and Extension unit
software version information.
1
Click the [Maintenance] button on the setup menu.
2
On the sub-menu that appears, click [Product
information].
This will display the "Product information" window.
Recorder information
Item
Version information
Software version 1
Software version 2
Hardware version
Software version of extension units
Ext. 1 to 5
MAC address
Camera port
Client PC port
Maintenance port
Serial number
Internal temperature
Current temperature
Highest temperature
76
Shows the Software 1 version.
Shows the Software 2 version.
Shows the hardware version.
Shows the software versions of Extension units 1 to 5.
Shows the MAC address of the Camera port.
Shows the MAC address of the Client PC port.
Shows the MAC address of the Maintenance port.
Shows the serial number of the recorder.
Shows the recorder's internal temperature.
Shows the highest internal temperature recorded up to now since power was turned on and the
time it was recorded.
3
Check the items you want.
Refer to "Recorder information" table for details about the
settings.
Description