Table 1-4: Su-A/E Subscriber Unit Types - Alvarion BreezeACCESS VL System Manual

Chapter 1 - System Description
SU-54-BD (SU-54)
SU-6-BD (SU-6)
SU-3-BD (SU-3)
SU-8-BD (SU-8)
* In the past, SU-6-1D units were also available. After being upgraded to version
5.0, SU-6-1D units will automatically be changed to SU-6-BD units.
** In the past, only SU-3-1D and SU-3-4D were available. After being upgraded to
version 5.0, SU-3-1D/4D units will automatically be changed to SU-3-BD units.
(In SNMP, these units will be reported as SU-3-4D. However, all SU-3 units
running SW version 5.0 or higher will behave as SU-3-BD units, supporting a full
LAN).
The IDU provides the interface to the user's equipment and is powered from the
110/220 VAC mains. The customer's data equipment is connected via a standard
IEEE 802.3 Ethernet 10/100BaseT (RJ 45) interface. The indoor unit is
connected to the outdoor unit via a Category 5 Ethernet cable. This cable carries
Ethernet traffic between the indoor and the outdoor units, and also transfers
power (54 VDC) and control from the indoor unit to the outdoor unit.
10
Table 1-5: SU-A/E Subscriber Unit Types
SU Type
A high-rate CPE that supports a full LAN. Not available in
the 900 MHz band.
A medium rate CPE that supports a full LAN*. Not available
in the 900 MHz band.
An entry level CPE that supports a full LAN**
A medium rate CPE that supports a full LAN. Available only
in the 900 MHz band. The SU-8 functionality is available by
loading the relevant feature license to an SU-3 unit.
Description
BreezeACCESS VL System Manual