Chapter 2 - Installation
2.3.2.3
Pole Mounting the ODU with the Tilt Accessory
Figure 2-6: New SU-A-ODU Pole Installation Using the Tilt Accessory, Vertical Polarization
To mount the ODU on a pole using the Tilt accessory:
Attach the Tilt accessory to the ODU using the two pairs of flat washers,
1
spring washers and nuts supplied in the Tilt kit.
Mount the Tilt accessory on a 1" to 4" pole using two 9/16" metal bands.
2
Release slightly the Tilt Control Screw, tilt the ODU downward/upward as
3
required, and re-tighten the screw.
46
BreezeACCESS VL System Manual