Country Code Selection - Alvarion BreezeACCESS VL System Manual

Chapter 3 - Commissioning
VLAN ID-Management
Authentication Algorithm
Data Encryption Option
Security Mode
Default Multicast Key (AU)
Promiscuous Authentication (AU)
Default Key (SU)
Key 1 to Key 4
NOTE
Some parameters are changed to their new values only after reset (refer to Appendix E for more
details). After the basic parameters are configured, the unit should be reset in order to activate the
new configuration.
3.1.2

Country Code Selection

CAUTION
The selected Country Code must comply with applicable local radio regulations.
72
Table 3-1: Basic Parameters
Parameter Default Value
65535
Open System
Disable
WEP
Key 1
Disable
Key 1
00......0 (32 zeros,
meaning no key)
BreezeACCESS VL System Manual
Comment
Availability of security
parameters depends on
support according to the
country code.