Smartstart Autorun Menu - HP ML330 - ProLiant - G3 Setup And Installation Manual

•
Create and copy standard server configuration scripts using the Scripting Toolkit
and Configuration Replication Utility.
•
Test server hardware using the new Enterprise Diagnostics LX32 Utility.
•
Update the latest system or option ROM using the ROM Update Utility.
•
Install software drivers directly from the CD. With systems that have internet
connection, the SmartStart Autorun Menu provides access to the complete list of
ProLiant System Software on the website.
To install the SmartStart software:
1. Press the F9 key to run RBSU and configure the primary operating system.
2. Locate the SmartStart CD in the ProLiant Essentials Foundation Pack.
3. After you power up the server, press the CD-ROM drive eject button.
4. Insert the SmartStart CD into the CD-ROM drive with the labeled side up.
Handle the CD by its edges, not by the flat surfaces of the disc.
5. When the busy indicator turns green, the SmartStart sequence begins.
Refer to the SmartStart documentation included with the server to install the
operating system, create updated driver diskettes, and run upgrade utilities.
For more information about SmartStart software, refer to the HP website
(
www.hp.com/servers/smartstart

SmartStart Autorun Menu

The SmartStart Autorun Menu enables you to access the latest system software
directly from the operating system environment, simply by inserting the SmartStart
CD into a configured system. The Autorun Menu enables you to:
•
Install the latest ProLiant Support Packs.
•
Create software diskettes for selected software.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
).
Server Configuration and Utilities
5-13