Usb Support; Smartstart Software - HP ML330 - ProLiant - G3 Setup And Installation Manual

Server Configuration and Utilities
To download the tool and for more information, refer to the HP website
(
www.compaq.com/support/ files/server/us/webdoc/rom/RemoteROMUser-001.pdf

USB Support

HP provides both standard USB support and legacy USB support. Standard support is
provided by the operating system through the appropriate USB device drivers. HP
provides support for USB devices before the operating system loading through legacy
USB support, which is enabled by default in the system ROM. HP hardware supports
USB version 1.1.
Legacy USB support provides USB functionality in environments where USB
support is normally not available. Specifically, HP provides legacy USB functionality
at:
•
POST
•
RBSU
•
Diagnostics
•
DOS
•
Environments which do not support USB natively
For more information on ProLiant USB support, refer to the HP website
(
www.compaq.com/products /servers/platforms/usb-support.html

SmartStart Software

The SmartStart CD is used to load the server software, thereby achieving a
well-integrated server and ensuring maximum dependability and supportability. The
SmartStart CD contains diagnostic utilities and ROMPaq tools.
SmartStart software enables you to:
•
Install selected server operating systems using packaged product CDs.
•
Install the latest optimized drivers.
5-12 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
).
).