Integrated Ata Raid Management Utility; Management Utility Features; Using The Management Utility - HP ML330 - ProLiant - G3 Setup And Installation Manual

Integrated ATA RAID Management Utility

The Integrated ATA RAID Management Utility is a standard feature of ATA models
of the server. This section details the features of the utility, including how to access
and change utility options.

Management Utility Features

The features of the Integrated ATA Management Utility include:
•
Visual representation of array status using the Applications tray icon (Microsoft
OS only)
•
Writing of array status to log file (Linux, Netware, and Microsoft OS)
•
Writing of array status to the console (Netware OS)
•
Automatic rebuild of pre-configured online spares following a RAID 1 failure
(Linux, Netware, and Microsoft OS)

Using the Management Utility

Once installed and running, no user intervention is required for the use of the
Integrated ATA RAID Management Utility. The utility runs automatically at boot
time.
If you must shut down the utility for any reason (such as updating to a newer
version), follow OS-specific instructions in this section:
Microsoft Operating Systems
•
Right-click on the Spy tray icon (a small, round character with sunglasses) and
select Quit Spy. The Integrated ATA RAID Management Utility will quit.
•
To restart the utility, perform one of the following actions:
— Log out of and back into Windows to restart the utility.
— Reboot the unit.
— Manually start the application.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
RAID Configuration and Management
6-7