HP ML330 - ProLiant - G3 Setup And Installation Manual page 99

RAID Configuration and Management
•
To respond to an unexpected message, such as
Configuration Mismatch
ATA cables, and power cables.
•
To respond to a
press the F8 key to go to the setup and create the array configuration as needed.
The message displays because the new drives had been used before and the
configuration on the drives was not cleared.
6-10
, power down the server and check all connections,
Configuration Mismatch
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
Drives Missing
message after adding new drives,
or