HP ML330 - ProLiant - G3 Setup And Installation Manual page 79

•
Erase NVRAM/Boot Space Disk enables you to reset the configuration settings
to their factory defaults and to erase the boot disk, including the operating
system.
•
Set CPU Corrected is used to indicate that the previously failed processor has
been corrected or replaced.
•
Wake-On LAN enables or disables the WOL feature for all NICs in the server.
By default, this setting is Enabled.
•
NMI Debug Button enables debug functionality when the system has
experienced a software lock-up. By default, this setting is Enabled.
•
Custom POST Message allows you to input a message that can be viewed
during POST.
•
Processor Hyper-Threading allows Intel Hyper-Threading technology to be
enabled or disabled. Processor Hyper-Threading delivers two logical processors
that can execute multiple tasks simultaneously using shared hardware resources
of a single processor. By default, this setting is Enabled.
BIOS Serial Console Menu
The BIOS Serial Console option allows you to configure the serial port to view
POST error messages and run RBSU remotely through a serial connection to the
server COM port. The server that you are remotely configuring does not require a
keyboard and mouse. For more information about BIOS Serial Console, and a copy
of the BIOS Serial Console User Guide, refer to the HP FTP site
(
ftp://ftp.compaq.com/pub/products/servers/management/smartstart/bios-
serialconsole.pdf
Utility Language
The Utility Language option is used to set the language in which RBSU is displayed.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
).
Server Configuration and Utilities
5-7