Table 4-1: Ata Cabling Sequence - HP ML330 - ProLiant - G3 Setup And Installation Manual

Hardware Options Installation
3. Connect the next available ATA cable connector to the hard drive. Use the
following cable sequence.

Table 4-1: ATA Cabling Sequence

Connection
Order
1
2
3
4
Note: For drive bay locations, refer to Chapter 1, "Component
Identification."
4. Connect the next available power cable connector to the hard drive.
For more information about connecting ATA cables, refer to "Drive Connection
Tips" in Chapter 6, "RAID Configuration and Management."
4-18
System Board
Connector
ATA/100 RAID
primary controller
ATA/100 RAID
secondary controller
ATA/100 RAID
primary controller
ATA/100 RAID
secondary controller
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
Cable Drive Location
Connector
Device 0 Hard drive bay 2
Device 0 Media bay 3
Device 1 Hard drive bay 3
Device 1 Media bay 4