Defining Bandwidth Settings - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

180 C 13: C
HAPTER ONFIGURING
Defining Bandwidth
Settings
Q S
UALITY OF ERVICE
The Bandwidth Setup Page allows network managers to define the
bandwidth settings for a specified interface. Interface shaping can be also
be applied to the egress traffic on a specified interface.
Monitor users have no access to this page.
To configure Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page
opens:
Figure 96 Bandwidth Setup Page
The Bandwidth Setup Page contains the following fields:
Ingress Rate Limit
Enable Ingress Rate Limit — Enables setting an Ingress Rate Limit.
■
Ingress Rate Limit — Defines the ingress traffic limit for the port. The
■
field options include 128, 1024, 5056, 10048, 50048, 100032 and
500032 kbits per second.
When using the command line interface, the field range is
64-100,000 kbits per second for Fast Ethernet ports, and
64-1,000,000 kbits per second for Gigabit Ethernet ports
at a resolution of 64 kbits per seconds.