3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual page 213

Managed poe switch
Table of Contents

Advertisement

Table 12 Port Statistics Summary Page - Field Description (continued)
Field
Symbol Errors
Drop Events
Octets
Packets
Broadcast PKTS
Multicast PKTS
Undersize PKTS
Oversize PKTS
Fragments
Jabbers
CRC Align Errors
Description
For an interface operating at 100 Mb/s, the number of
times there was an invalid data symbol when a valid
carrier was present. For an interface operating in
half-duplex mode at 1000 Mb/s, the number of times
the receiving media is non-idle (a carrier event) for a
period of time equal to or greater than slotTime, and
during which there was at least one occurrence of an
event that causes the PHY to indicate 'Data reception
error' or 'carrier extend error' on the GMII. For an
interface operating in full-duplex mode at 1000 Mb/s,
the number of times the receiving media is non-idle (a
carrier event) for a period of time equal to or greater
than minFrameSize, and during which there was at least
one occurrence of an event that causes the PHY to
indicate 'Data reception error' on the GMII.
The total number of events in which packets were
dropped due to lack of resources.
The total number of octets received on the interface,
including framing characters.
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a
multicast or broadcast address at this sub-layer.
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to
a multicast address at this sub-layer, including those that
were discarded or not sent.
The total number of frames received that were less than
64 octets long (excluding framing bits, but including FCS
octets) and were otherwise well formed.
The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets) and were otherwise well formed.
The total number of frames received that were less than
64 octets in length (excluding framing bits, but including
FCS octets) and had either an FCS or alignment error.
The total number of frames received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets), and had either an FCS or alignment error.
The number of CRC/alignment errors (FCS or alignment
errors).
213

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officeconnect 3crdsf9pwr

Table of Contents