Configuring Acl Binding - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

96 C 4: M
HAPTER ANAGING
Configuring ACL
Binding
D S
EVICE ECURITY
After configuring the required ACLs, you should bind them to the ports
or LAGs that need to filter traffic. You can only bind an interface to one
ACL for each basic type – IP and MAC.
The ACL Binding Setup Page allows the network administrator to bind
specific ports to MAC- or IP-based ACLs.
Monitor users have no access to this page.
To define ACL Binding:
1 Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup
Page opens:
Figure 49 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Select Port(s) — Selects the ports to be configured.
■
Bind ACL — Assigns an Access Control List to a port or LAG.
■
MAC-based ACL — Displays the MAC based ACL to which the
■
interface is assigned.
IP-based ACL — Displays the IP based ACL to which the interface is
■
assigned.
Select ACL — Selects the ACL from a list of previously defined Access
■
Control Lists to which the port or LAG can be bound. To bind an ACL
to a LAG, the ACL should be bound to its port members.