Removing Ip Based Acls - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

Removing IP Based
ACLs
To create a new IP-based ACL:
1 Select Create ACL.
2 Enter the name of the new ACL.
3 Click
To define a new IP-based ACL rule:
1 Select Select ACL.
2 Select the ACL from the list.
3 Define the fields for the new ACL rule.
4 Click
and the device is updated.
The IP Based ACL Remove Page allows the user to remove IP-based ACLs
or IP-based ACL rules.
Monitor users have no access to this page.
Click Device > ACL > IP Based ACL > Remove. The IP Based ACL
Remove Page opens:
Figure 47 IP Based ACL Remove Page
. The new ACL is created, and the device is updated.
. The new IP-based ACL rule settings are configured,
Defining Access Control Lists 93