Configuring the
Polling Interval
1 Click Device Summary > Polling Interval. The Polling Interval Page
2 Define the polling interval.
3 Click
Unit Up Time — Displays the amount of time since the most recent
■
device reset. The system time is displayed in the following format:
Days, Hours, Minutes, and Seconds. For example, 41 days, 2 hours, 22
minutes and 15 seconds.
Boot Code Version — Displays the current boot version running on
■
the device.
Hardware Version — Displays the current hardware version of the
■
device.
The Polling Interval Page displays the interval at which information on the
Web management pages is refreshed.
To configure the polling interval:
opens:
Figure 21 Polling Interval Page
The Polling Interval Page contains the following fields:
Polling Interval — Displays the current setting for the polling interval. The
■
range for this field is 10-180 seconds, and the default is 60 seconds. This
field can also be set to 0 seconds to disable polling.
. The polling interval is set, and the device is updated.
51