Defining Cos To Queue Mapping - 3Com 3CRDSF9PWR-US - OfficeConnect Managed Fast Ethernet PoE Switch User Manual

174 C 13: C
HAPTER ONFIGURING
Defining CoS to
Queue Mapping
Q S
UALITY OF ERVICE
The CoS to Queue Setup Page contains fields for mapping CoS values to
traffic queues. Four traffic priority queues are supported on the device,
with 0 representing the lowest queue and 3 as the highest.
Monitor users have no access to this page.
To configure CoS values to queues:
1 Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup
Page opens:
Figure 91 CoS to Queue Setup Page
The CoS to Queue Setup Page contains the following fields:
Restore Defaults — Restores the device factory defaults for mapping
■
CoS values to a forwarding queue.
Class of Service — Specifies the CoS priority tag values, where 0 is
■
the lowest and 7 is the highest.
Queue — Defines the traffic forwarding queue to which the CoS
■
priority is mapped.
2 Define the queue number in the Queue field next to the required CoS
value.
3 Click
device is updated.
. The CoS value is mapped to a queue, and the