Configuring Local
Database
Authentication
1 Click Port > Local Database > Setup. The Local Database Setup Page
2 Define the fields.
3 Click
The Local Database Setup Page allows the network administrator to
globally enable or disable local-database authentication for the switch.
Monitor users have no access to this page.
To configure Local Database Settings:
opens:
Figure 30 Local Database Setup Page
Local Database Setup Page contains the following fields:
The
System Authentication Control — Configures local-database
■
authentication globally for the switch. The possible field values are:
Enabled — Enables local database authentication on the device.
■
Disabled — Disables local database authentication on the device.
■
This is the default.
. The
Local Database Settings
updated.
Defining Local Database Authentication
are enabled, and the device is
67