Community Strings And Trap Receivers - D-Link DES-3624i User Manual

Stackable NWay Ethernet Switch User's Guide

Community Strings and Trap Receivers

To use the functions on this window, enter the appropriate SNMP information in the Community Strings and Trap
Receiving Stations sections--you may enter up to four entries in each section. A trap receiving station is a device that
constantly runs a network management application to receive and store traps. Then click Apply to put the settings
into effect.
The SNMP Access Policy Setting information is described as follows:
Community String A user-defined SNMP community name.
Access Right The permitted access of Read-Only or Read-Write using the SNMP community name.
Status Option to set the current community string to Valid or Invalid.
The SNMP Trap Manager Configuration information is described as follows:
Trap Receiving Station The IP address of the trap receiving station.
Community String A user-defined SNMP community name.
Status Option to set the trap receiving station to Enabled or Disabled.
Web-Based Network Management
Figure 7-38. Community Strings and Trap Receivers window
141