After filling in the fields above, press START to initiate the Ping test.
The fields you can set are:
Destination IP Address The IP address of the device to be Pinged.
No. of Pings Amount of times the Switch should send the Ping (1-255). If zero is chosen, the Switch will continue
Pinging indefinitely.
In the lower part of the Ping Test screen, you can view the Result of the ping test.
Save Settings to TFTP Server
Choose Save Settings to TFTP Server from the Utilities menu (under System Utilities on the main menu) to
access the following screen:
86
Figure 6-48. Ping Test screen
Stackable NWay Ethernet Switch User's Guide
Using the Console Interface