Console; Monitoring - D-Link DES-3624i User Manual

Console

This window allows you to choose the refresh rate in the Console Timeout field (2 minutes, 5 minutes, 10 minutes,
15 minutes or Never). Select the protocol for communicating through the console port, Console or SLIP, in the
Serial Port field. Use SLIP for out-of-band management. If SLIP is being used, you may also set the Baud Rate in the
last field. Click Apply and then reboot the Switch for console port settings to take effect.
The default serial port settings are:
Baud Rate=9600
Data Bits=8
Flow Control=X on/X off
Parity=None
Stop Bits=1

Monitoring

This third main category of the Switch Web-based management program includes: Switch Overview, Port
Utilization, Port Traffic Statistics, Port Error Packet Statistics, Port Packet Analysis, Browse
144
Figure 7-41. Configure Console window
Stackable NWay Ethernet Switch User's Guide
Web-Based Network Management